Oneview default scripts don't support A/B/C EOS devices?

[Rahman_Duran1]

Hi,

When I try to run default scripts like ModBPConfigBasic in OneView on A4H124-48, it fails. I looked to script's code and it seems it is not for EOS?

So all these predefined scripts are for XOS?

Thanks.

[Rahman_Duran1]

For your information, GTAC confirmed that this is how OneView designed so it is expected. You can not run scripts on devices on non-discovered devices (no snmp access) via OneView even OneView can access the device via CLI.

[Rahman_Duran1]

I did it Case Number: 01132470.

Thanks,

Rahman

[Mike_Thomas]

Rahman, Can you open a case with the GTAC? We can run some debug for you to gather for this issue and can figure it out that way. I do not wish to discuss the debug process on the hub, as improper use can fill a hard drive of the server if misused.

[Rahman_Duran1]

I tried in inventory manager with execute script. IM can connect to both switches via ssh credentials and can run "show time" command with success.

But OneView, one one switch the script works but the other throws
*** Error at line - 59 ***
Missing parameter for task : CLI_LOGIN_PROMPT

So there is no problem with profile mapping. Any other ideas?