This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Oneview/Purview application response times missing

Oneview/Purview application response times missing

mp2014
New Contributor II

‎02-08-2015 10:02 AM

Hi,

i see no network or applications response times in Purview/Oneview, what to check in my configuration?
0 Kudos
31 REPLIES 31

Nico_Willamowsk
New Contributor III

‎03-10-2015 09:44 AM

Okay, in our case it just take some minutes. Then we saw application and Network Response time.
0 Kudos

mp2014
New Contributor II

‎03-10-2015 09:37 AM

Hi,
its a virtual appliance, the vmware specific configuration options are in place but we didnt set for vlan 0-4096. I'll try this...
0 Kudos

Nico_Willamowsk
New Contributor III

‎03-10-2015 07:20 AM

In VM Ware it´s necessary to configure the Port Group for mirroring specially. The Promiscuous Mode had to be "Accepted" and the VLAN Type had to be "VLAN-Trunking" In the VLAN Area you have to be defined the VLAN "0-4094". So you can mirror tagged and untagged traffic and you will see Network and application Response Time. In our Installation with a virtual purview appliance the missing VLAN type and vlan Definition 0-4094 resolved the Problem.
0 Kudos

Nico_Willamowsk
New Contributor III

‎03-09-2015 03:21 PM

Do you have a Virtual or Hardware Purview Appliance?
0 Kudos

mp2014
New Contributor II

‎02-26-2015 02:52 PM

Hi,

I just checked the onboard netflow collector of netsight. I dont see any response times for these flows neither. Maybe a general problem with my netsight installation?
Should response times get collected for any flow? I double checked documentation and dont see any advise that I have to enable something to get these data...
0 Kudos
GTM-P2G8KFN