Oneview/Purview application response times missing
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-08-2015 10:02 AM
Hi,
i see no network or applications response times in Purview/Oneview, what to check in my configuration?
i see no network or applications response times in Purview/Oneview, what to check in my configuration?
30 REPLIES 30
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-10-2015 09:44 AM
Okay, in our case it just take some minutes. Then we saw application and Network Response time.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-10-2015 09:37 AM
Hi,
its a virtual appliance, the vmware specific configuration options are in place but we didnt set for vlan 0-4096. I'll try this...
its a virtual appliance, the vmware specific configuration options are in place but we didnt set for vlan 0-4096. I'll try this...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-10-2015 07:20 AM
In VM Ware it´s necessary to configure the Port Group for mirroring specially. The Promiscuous Mode had to be "Accepted" and the VLAN Type had to be "VLAN-Trunking" In the VLAN Area you have to be defined the VLAN "0-4094". So you can mirror tagged and untagged traffic and you will see Network and application Response Time. In our Installation with a virtual purview appliance the missing VLAN type and vlan Definition 0-4094 resolved the Problem.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-09-2015 03:21 PM
Do you have a Virtual or Hardware Purview Appliance?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-26-2015 02:52 PM
Hi,
I just checked the onboard netflow collector of netsight. I dont see any response times for these flows neither. Maybe a general problem with my netsight installation?
Should response times get collected for any flow? I double checked documentation and dont see any advise that I have to enable something to get these data...
I just checked the onboard netflow collector of netsight. I dont see any response times for these flows neither. Maybe a general problem with my netsight installation?
Should response times get collected for any flow? I double checked documentation and dont see any advise that I have to enable something to get these data...
