cancel
Showing results for 
Search instead for 
Did you mean: 

Right MIB in NetSight for querying CISCO's vlans

Right MIB in NetSight for querying CISCO's vlans

Ilya_Semenov
Contributor
Hello, everybody!

I have a task to get vlans from cisco switches using Netsight. Local Extreme's engineer told me, that it is possible using MIT tools&Flexview.

Could you please explain me how to reach the goal?

I post a picture just to show where I am at a deadlock(((

Many thanks in advance,

ILya

807ad38afef8492b837bd03c78bb0ec9_RackMultipart20160414-38388-hiu5pl-mib_for_vlan_inline.jpg

6 REPLIES 6

Kawawa
Extreme Employee
Hi Ilya,

Netsight has a FlexView for Cisco VLANs. If you open the FlexView Database, and navigate to VLAN, there's a CiscoVLAN.tpl FlexView.

f54b529839d94770b7a2111b3a256abf_RackMultipart20160415-30864-11n2as-FlexviewOpen_inline.png



f54b529839d94770b7a2111b3a256abf_RackMultipart20160415-42054-vqte7q-CiscoVLAN_inline.png



And while it returns mostly interface information, If you select Properties from the menu I showed in the first screenshot, you can edit it and add your own OIDs like Mike previously mentioned, OR, you could create an entirely new FlexView

f54b529839d94770b7a2111b3a256abf_RackMultipart20160415-94556-a9kzfb-Properties_inline.png



I hope is what you're asking to do.

All the best!

Mike_D
Extreme Employee
Hello Ilya,\

Try getnext on this table:

dot1qVlan=1.3.6.1.2.1.17.7.1.4

Regards,
Mike

GTM-P2G8KFN