cancel
Showing results for 
Search instead for 
Did you mean: 

There is no switch discovery in ZTP.

There is no switch discovery in ZTP.

Vicent3
New Contributor

Hello,

I am configuring ZTP but the switch is not discovered, I have the following configuration.

 

76c8c8cee0c449f29e68f77dacc4f20d_1e21b38d-db61-4c80-910a-e418ac4a96e3.png

 

76c8c8cee0c449f29e68f77dacc4f20d_4b33a07c-2593-4ae1-bbe2-d80eb82cb900.png

 

76c8c8cee0c449f29e68f77dacc4f20d_58cefa54-5e4b-4508-85d0-e168fb46023d.png

 

The switch is a X440G2-12p-10G4 model, with a version 30.5.1.15.

Netsight version is  8.4.3.24.

 

The Switch takes IP by DHCP, I contact it by ICMP and I can telnet to it but in EMC it is not discovered.

 

76c8c8cee0c449f29e68f77dacc4f20d_8cec3bf3-38cf-4e08-a423-25b08cedede4.png
Additionally, I already validated that you are resolving extremenetwork with the Netsight IP address but I still don't see anything in the discovered tab.

 

76c8c8cee0c449f29e68f77dacc4f20d_602917e5-e505-4943-887c-6a4f61908ad0.png

 

How can I resolve this situation?

1 ACCEPTED SOLUTION

Rodney_Lacroix
Extreme Employee

Does your Operations panel say that the devices are being discovered? If so, then check your Actions tab and make sure the “Automatically Add” option is enabled.

View solution in original post

5 REPLIES 5

Vicent3
New Contributor

Hello,

 

An apology, I misspelled you you are right, the record is extremecontrol.domainname. Domain name, it already solves me like this.

 

Regards.

Hello Tyler,

The problem is that in the discover tab, if it shows me anything.

Regards!

Vicent3
New Contributor

 

Hello,

If I have that option enabled.

 

160f3aa351dd4ac4a7f617467a113d06_3823d34f-ea4f-45f2-afc9-ac6f3bbc1133.png

 

Regards!

Vicent3
New Contributor

Hello,

 

An apology, I misspelled you you are right, the record is extremecontrol.domainname. Domain name, it already solves me like this.

 

Regards.

Rodney_Lacroix
Extreme Employee

Does your Operations panel say that the devices are being discovered? If so, then check your Actions tab and make sure the “Automatically Add” option is enabled.

GTM-P2G8KFN