trying to configure a simple network

[Gus_Rodriguez]

just purchased extreme network 440 and a new router. Its my understanding i don't need a router that the switch can do dhcp as well? if this is the case how would i set the static from my isp on a specific port and be able to utilize the rest of the ports for connection to other devices for connection to the internet. just one vlan so i can begin to learn these switches. trying to keep it simple for now. i've managed to set an ip on the switch and can access the gui. but i dont know how to set one of the ports to be my "in" port from my modem w static settings

[Narayanan__Kart]

Please find the link:

https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-support-NAT/

[Narayanan__Kart]

Hi Gus,

Before adding the route on our switch, please make sure NATing is done.
I assume it's been take care before it reaches x440.
EXOS platform devices will not support NAT feature.

Regards,
Karthikeyan

[Ram3]

Yes, x440 can used for DHCP. You can uplink the ISP connection on the x440 switch and assign that port to a vlan for connectivity.

How to create and delete static routes in EXOS:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-and-delete-static-routes-in-...

How To Configure a default route in EXOS:
https://gtacknowledge.extremenetworks.com/articles/How_To/Configure-a-default-route-in-EXOS