I have an X450G2 24 port test switch and I wanted to see if XMC (Netsight) could push the newer SummitX-220.127.116.11.xos firmware file to it. The firmware is loaded and I attempted to have this pushed to the switch. After about 8 minutes or so of no progress, it eventually errored out. I went over to the Events tab and under the Inventory Server category there is a Firmware Download Event with the following details:
Firmware Download summitX-18.104.22.168.xos: (10.1.0.111) - Error Downloading Firmware. See event log for details. : X450G2-24p-G4.1 # enable %% Incomplete command X450G2-24p-G4.2 # upgrade tftp://10.1.0.110/firmware/images/summitX-22.214.171.124.xos ^ %% Invalid input detected at '^' marker. X450G2-24p-G4.3 # exit
Any idea how to get this to work? This is my test switch and I want to perfect this capability before I would attempt to use it on my core X690s someday when I get the courage to update each VRRP capable core.