cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

VLAN separation with common access to one vlan

VLAN separation with common access to one vlan

Juergen_Graefe
New Contributor
Hello,
our customer has 18 tenants in a building which share a common it infrastructure. Each tenant should be able to access the common resource telephone system and internet. The tenant networks should be separated.
What I did:
a vlan for each tenant with an ip address as a tenant gateway
ipforwarding for all vlans
Is there a possibility to separate the tenant networks, without for each tenant a traffik deny for all other tenants to place?
Switch: X460 G2, FW: 22.3.1.4
Software: NetSight
Thanks in advance
Best Regards
Juergen Graefe
6 REPLIES 6

Pascal_Lurquin
New Contributor II
This it what I used ... ACLs are very easy with Extreme Networks šŸ™‚

It's not the case with Cisco ...

Anyway your problem was solved : Great !

Juergen_Graefe
New Contributor
I have solved the problem by having ipforwarding enabled for all vlans and
for each tenant I has created an access list with a mutual exclusion.
Thanks for replay

Pascal_Lurquin
New Contributor II

Juergen_Graefe
New Contributor
Thanks pascal for your replay.
I have private vlan "inet" configured
create private-vlan InetPriv
configure private-vlan InetPriv add networkv "Inet"
If I then try to add a tenant vlan as "non-isolated"
configure private-vlan InetPriv add subscriber "ForIB" non-isolated
I get the error "Subscriber VLAN can not have ip address Configured"
This IP address I need, but nevertheless the routing for this tenant works?

GTM-P2G8KFN