cancel
Showing results for 
Search instead for 
Did you mean: 

XIQ-SE onboard through proxy

XIQ-SE onboard through proxy

Dan15
Contributor

Has anybody ever successfully onboarded XIQ SE through a proxy server? The welcome page allows to set proxy server, after a while it failes:

Unable to communicate with ExtremeCloud IQ properly after onboarding. You may need to try again later after verifying network connectivity.

I did a tcpdump and I can see communication with the proxy, however at a certain stage it tries to connect to extremecloudiq.com without proxy and of course it fails. 

1 ACCEPTED SOLUTION

Robert_Haynes
Extreme Employee

This is a known issue with all current releases of XIQ-SE. As you’ve discovered there are certain calls that are not proxied and XIQ-SE will attempt to ‘direct dial’ and fail if no alternative routable path is found…

If you would like this tracked please consider opening a case and note defect CFD-6675. Thank you.

View solution in original post

3 REPLIES 3

Zdeněk_Pala
Extreme Employee
Version 21.9.10.90 (GA) has this issue fixed.
Regards Zdeněk Pala

Robert_Haynes
Extreme Employee

Title: XIQ-SE 21Q2R1 Onboarding Using HTTP Proxy Fails "Unable to communicate with ExtremeCloud IQ properly after onboarding."
Article Link: https://extremeportal.force.com/ExtrArticleDetail?an=000097990

Robert_Haynes
Extreme Employee

This is a known issue with all current releases of XIQ-SE. As you’ve discovered there are certain calls that are not proxied and XIQ-SE will attempt to ‘direct dial’ and fail if no alternative routable path is found…

If you would like this tracked please consider opening a case and note defect CFD-6675. Thank you.

GTM-P2G8KFN