ZTP+: Invalid configuration provided by controller IP address extremecontrol

[Stephen_Stormon]

I have a X460G2-24t-10G4 that has connected to Extreme Management via ZTP+. It is in a "ZTP+ Pending Edit" stage, but when I edit it and click "Save", EMC says "ZTP+ Configuration Error" and the log on the switch says " ZTP+: Invalid configuration provided by controller IP address extremecontrol"

[Stephane_Grosj1]

Hi,

if you're using XMC 8.x, you really should use CC 3.0. So, did you upgrade the CC version on the switch to the latest 3.0?

You might have tried to send a config command that is not supported on the default CC version on EXOS (1.1.x), thus the error message.

CC 3.0 can be found here:
https://github.com/extremenetworks/EXOS_Apps/tree/master/CloudConnector