cancel
Showing results for 
Search instead for 
Did you mean: 

Background Scans and DFS

Background Scans and DFS

JA
New Contributor III
Hi
I was wondering if anyone had heard if there is an ETA on a fix for the issue where background scans aren't performed if the radio is on a DFS channel?
Thanks
17 REPLIES 17

JA
New Contributor III
Hi Nick
I didn't do anything other than upgrade to 10.4.5.
When I checked it again when I saw activity on this thread I noticed it now only shows neighbours on the channel that the radio is on.
I'll try the CLI command when I get a chance (the school year is wrapping up) and see if I get the rest of the neighbours back.
J

Nick_Moore
Extreme Employee

Yes, please add that to your sCLI for the time being. I am looking into:

  1. Whether this is meant to be needed or if it should be enabled by default
  2. When this setting would be configurable in XIQ

sfolk
New Contributor III
Yes adding "radio profile <string> scan access dfs" worked, I now have neighbor information on both 5GHz radios.

So I guess I need to add that command via my supplemental CLI, or should this be automatic with the 10.4r5 firmware upgrade?

Nick_Moore
Extreme Employee
@sfolk try adding the following command manually or via supplemental CLI:
​​
radio profile <string> scan access dfs

I did not have to do this to get it working when testing with an AP410C, AP250, nor AP510CX. @jayotte did you have to do this to get it working?
GTM-P2G8KFN