Background Scans and DFS

[JA]

Hi
I was wondering if anyone had heard if there is an ETA on a fix for the issue where background scans aren't performed if the radio is on a DFS channel?
Thanks

[JA]

Hi Nick
I didn't do anything other than upgrade to 10.4.5.
When I checked it again when I saw activity on this thread I noticed it now only shows neighbours on the channel that the radio is on.
I'll try the CLI command when I get a chance (the school year is wrapping up) and see if I get the rest of the neighbours back.
J

[Nick_Moore]

Yes, please add that to your sCLI for the time being. I am looking into:

1. Whether this is meant to be needed or if it should be enabled by default
2. When this setting would be configurable in XIQ

[sfolk]

Yes adding "radio profile <string> scan access dfs" worked, I now have neighbor information on both 5GHz radios.

So I guess I need to add that command via my supplemental CLI, or should this be automatic with the 10.4r5 firmware upgrade?
​

[Nick_Moore]

@sfolk try adding the following command manually or via supplemental CLI:
​​
radio profile <string> scan access dfs

I did not have to do this to get it working when testing with an AP410C, AP250, nor AP510CX. @jayotte did you have to do this to get it working?
​