cancel
Showing results for 
Search instead for 
Did you mean: 

Getting AP340 Into ExtremecloudIQ

Getting AP340 Into ExtremecloudIQ

LeithC
New Contributor
I have managed to get the AP into the device manger screen with the serial.  But the AP is not talking with ExtremecloudIQ.

What else do I need to do?

Thanks.
25 REPLIES 25

LeithC
New Contributor
I dont have of any of these sorry just a hobbyist with equipment who was given the AP instead of letting it go to waste.

AreckD
Extreme Employee

Hello,

Are you using anything to manage the ap?

You can use a connect instance for free by registering at extremecloudiq.com and then setting a new instance up as connect.

LeithC
New Contributor
Running image: Current version

Current version: HiveOS 6.5r10 build-205308
Build host: ci323
Build time: Wed Aug 8 10:33:16 UTC 2018
Build by: build
Build cookie: 1808080333-205308

Backup version: HiveOS 3.4r4
Build time: Thu May 20 04:15:09 UTC 2010

Load after reboot: Current version

Platform: HiveAP340_n
Bootloader ver: v1.2.5.39
LED PIC ver: v1.0.2
PoE PIC ver: v1.0.0
TPM ver: v1.2.17.3


CAPWAP client: Enabled
CAPWAP transport mode: HTTP on TCP
IDLE state: Preparing to enter the DISCOVERY state
CAPWAP client IP: 192.168.1.162
CAPWAP server IP: 54.172.0.252
HiveManager Primary Name:
HiveManager Backup Name:
CAPWAP Default Server Name: redirector.aerohive.com
Virtual HiveManager Name:
Server destination Port: 80
CAPWAP send event: Enabled
CAPWAP DTLS state: Enabled
CAPWAP DTLS negotiation: Enabled
DTLS next connect status: Enable
DTLS always accept bootstrap passphrase: Enabled
DTLS session status: Disconnect
DTLS key type: passphrase
DTLS session cut interval: 5 seconds
DTLS handshake wait interval: 60 seconds
DTLS Max retry count: 3
DTLS authorize failed: 0
DTLS reconnect count: 0
Discovery interval: 5 seconds
Heartbeat interval: 30 seconds
Max discovery interval: 10 seconds
Neighbor dead interval:105 seconds
Silent interval: 15 seconds
Wait join interval: 60 seconds
Discovery count: 0
Max discovery count: 3
Retransmit count: 0
Max retransmit count: 2
Primary server tries: 0
Backup server tries: 0
Keepalives lost/sent: 9/10
Event packet drop due to buffer shortage: 0
Event packet drop due to loss connection: 3

AreckD
Extreme Employee

Hello,

You should be able to get it at: https://extremeportal.force.com/ExtrDownloadDetail?id=a412T0000001OGNQA2

SamPirok
Community Manager Community Manager
Community Manager
You would need to onboard the AP before you can update it's firmware. The AP should typically connect on it's own, but if it doesn't then you would need to use the steps in the guide I referenced to connect the AP manually.
GTM-P2G8KFN