which EXOS switch features can be configured in XIQ: VLANS, tagging, stacking?

[ed_zubrickas]

Trying to determine if we can deploy some new L2-only X440-G2 units in stand-alone and stacked scenarios. A very simple network, using 5 VLANs, tagged inter-switch links, stacks. Can we on-board a factory-defaulted switch into XIQ and configure it with XIQ?

[Dilraj_Singh_Kh]

Check the below KB:

https://extremeportal.force.com/ExtrArticleDetail?an=000079990

[ed_zubrickas]

Nope. If you claim that stacking of EXOS switches is supported in XIQ, then no cheating....how do I setup the stack via XIQ?

[Dilraj_Singh_Kh]

This seems more like an EXOS question rather than ExtremeCloudIQ. Maybe you want to take this to the EXOS community group to get this answered?

[ed_zubrickas]

We have the X440-G2 switches on-boarded into XIQ by connecting the Mgmt ports to an external switch providing DHCP and internet access, and can make port-level VLAN assignments. Next, how do we create stacks using “native” ports (our case is X440-G2-48P-10GE4 switches, so it appears that rear ports 49 and 50 can be used to create the recommended ring topology using SFP+ DACs. How will Stack Master be determined, IP address for the stack?

[Dilraj_Singh_Kh]

Check the below KB:

https://extremeportal.force.com/ExtrArticleDetail?an=000079403

DILRAJ