cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme Control and Policy

Extreme Control and Policy

RobertD1
Contributor II

Hello,

Does Extreme Policy work on GNS3 EXOS VM?

I see the network policy Deny Access is sent to the switch port but does not block traffic. 

I will also test on a real switch but just wanted to know if it is possible or not.

Edit: I tested with a real switch and it worked!

The EXOS switch receives accept message with Deny policy. So, in End-Systems table it is green and accepted. Why is not a rejected status (red)? What if I want to be notified by email when there is a reject this will not trigger if accepted with Deny policy?

Thanks,

Rob

1 ACCEPTED SOLUTION

Stefan_K_
Valued Contributor

Hi @RobertD1 

If you want to have it rejected tick "Reject Authentication Request" in the NAC Profile. Then it won't be green in the end-system table. 

View solution in original post

1 REPLY 1

Stefan_K_
Valued Contributor

Hi @RobertD1 

If you want to have it rejected tick "Reject Authentication Request" in the NAC Profile. Then it won't be green in the end-system table. 

GTM-P2G8KFN