Extreme Networks

RobertD1

Hello,We have an X435 switch that is daisy chained to another switch and then onwards to the internet via a local site WAN router.The second switch was connected to Cloud IQ but has become disconnected. The first switch is still connected. On the sec...

RobertD1 · 08-31-2024

Hello,What is the best practice for updating an AP to change the band from 5Ghz to 2.4Ghz and add a new SSID via the Network Policy? Can this be done with just a delta update avoiding having to reset the AP or is it best to do a Complete update. Ther...

RobertD1 · 08-30-2024

Hello,Customer has inserted 100G transceiver in universal port U1 and a 100G DAC in port U2 (no VIM present) and the links don't come up and work with ISIS configured. Port U1 is down completely. Port U2 thinks it is up but not working.As these are a...

RobertD1 · 08-13-2024

Hello,If a site survey is carried out prior to installation of Extreme APs, should the power be set to match the radio used for the survey? So, if WiFi0 was used to check 2.4GHz band and had power level 7 dbM should the Extreme APs be configured to u...

RobertD1 · 07-10-2024

Hello,Original scenario is that a customer deployed XIQ-SE already and onboarded with Cloud IQ. The long unique serial number of XIQ-SE can be seen under NAC Entitlements under License Management. The GUI login page allowed login to XIQ-SE.A new XIQ-...

RobertD1

Hello,Found this article on using Microsoft NPS and EXOS showing how to setup admin or read only. You need to be admin to show the config I think. How To: How to configure radius server to provide admin level access / privileges or read-only access t...

RobertD1 · 11-14-2024

Hi Salva,Each site has a tab called Port Templates which has ZTP+ Automated Templates / Device Mappings which allow you to add a Device Mapping based on Family and Device type ie 5320-48P-8XE-SwitchEngine. For each row you can Add Port Mappings to th...

RobertD1 · 11-12-2024

Hi Russ,Did you use "root" when you did the migration? There is a user guide for this Workflow which mentions using a specific folder if root was not used to install XIQ-SE (or upgrade it).Rob

RobertD1 · 08-30-2024

Thanks Fredrik, will look at the port settings. Good to hear from you. Rob

RobertD1 · 08-30-2024

2.4GHz is where the critical devices are (old scanners).

Extreme Networks

User Statistics

User Activity

Upgrading X435 switch remotely

Delta versus Complete Updates

Universal Ports as regular ports in 5720 in Fabric Mode

Extreme APs and Power Settings and Site Survey

Installing a second XIQ-SE virtual appliance

Re: NPS and Extreme

Re: Workflow to apply port template

Re: Apply Config Template workflow not working since move to 24.10.10

Re: Universal Ports as regular ports in 5720 in Fabric Mode

Re: Extreme APs and Power Settings and Site Survey