After reboot, in X620-x16 switch link down with SFP mini-GBIC

[Salvatore_Aurni]

I have a problem with switch extreme X620-16T (10G) (IMG 21.1.3.7), SFP transceivers are used (therefore at 1G). I do the following steps:
- Set auto negotiation to off, speed 1000, full duplex, I save the configuration
- I enter the transceiver in the port, it is recognized as 1000T, I save the configuration.
Downstream are connected other switches (extreme x440-24t) and some PCs.
Everything works. (Repeat I saved configuration).
I reboot X620-16T, the auto-negotiation becomes "ON" and there is no communication with the other switches, while with the PC everything is OK.
In the x440-24t, switch ports have auto negotiation on.
Possible solutions? Thank you

[Drew_C]

Hi Salvatore,
If this issue is still causing problems, please open a ticket with GTAC so they can help you solve this.

[Erik_Auerswald]

Hi Salvatore,

have you tried to set auto negotiation to on instead of off, as 1G is supposed to function?

Thanks,
Erik

[Salvatore_Aurni]

I know it, but with the auto-negotiation in both switches the link is down.

[BradP]

Hi Salvatore,

What if you use "config port auto on speed 1000 duplex full". 1G requires auto-negotiation, per standard. Please see https://en.wikipedia.org/wiki/Gigabit_Ethernet

Thanks
Brad