ExtremeSwitching (EOS) - Page 47 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

S-Series hard coded port isn't working

After hard coding a port on my S-Series S1 switch the port will not work. I have hard coded the port using the following commands in order; set port duplex ge.1.46 full, set port speed ge.1.46 1000, set port negotiation ge.1.46 disable. I have tried ...

Looking for Firmware for C3G124-xx

Hello together, I'm looking for the newest Firmware for my Enterasys C3G124-24P/48P... Badly they are End of life and so I can't get any from our support.... Is there someone who got them still on there Hard Drive and would share it with me? Thank...

MSTMAP? Switch is VLAN 9 with SID 5, but stats show it in SID 0

I have a switch with the following config: #spantree set spantree mstcfgid cfgname 'SP4' rev 1 set spantree msti sid 2 create set spantree msti sid 3 create set spantree msti sid 4 create set spantree msti sid 5 create set spantree mstmap 9 sid 5 set...

What happens if an S-Series receives tagged RSTP BPDUs?

Hi all, what happens if an S-Series switch receives tagged a RSTP BPDU on a port? Standard conforming spanning tree BPDUs are never tagged with a VLAN ID, but some devices add a .1Q tag with VLAN ID to otherwise standard BPDUs (e.g. Alcatel 1x1 mod...

QOS for Shoretel Phones on Extreme Switch Model B5G124-48P2

Greetings all, I am new to switching so bear with me. I have inherited a network with about a dozen branch offices. One office in particular is experiencing poor voip quality with their Shoretel phones. I would like to setup QOS on the B5G124-48P2...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN