Can DAC cables and optical fibers coexist in the same stack?

[Aaron_wang]

I currently have 4 Extreme switches 7520-48Y-8C-AC-F. Two of them are in one cabinet, and the other two are in another cabinet which is 1 kilometer away. I need to stack these four switches. I have configured two 100G-DACP-QSFPZ5M direct copper cables and four 100G-FR-QSFP2KM optical modules. Could this solution be feasible? Can the DAC straight cable and the optical fiber coexist in the same stack?

[dariusmp]

Yes, in principle that setup should be possible. Extreme’s documentation for the 7520:

“Up to eight systems can be stacked using qualified direct attach cables and/or optical transceivers.”

https://www.extremenetworks.com/products/switches/universal-switches/7520

So, as I understand it, there should be no problem mixing DAC cables and fiber links within the same stack. In this case, I would use the 100G DAC cables to connect the switches in the same cabinet, and the 100G-FR-QSFP2KM transceivers for the two 1 km links between cabinets, closing the stack ring.

[Aaron_wang]

Thank you very much for your confirmation. I think the same way.