cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure trunk and access port in enterasys switches please help here

how to configure trunk and access port in enterasys switches please help here

maymaythar
New Contributor

Hi, 

It is for the following switch and version:

Model                            Versions
--------------  -----------------  -------------------

C3G124-48P               Fw:06.61.08.0013

 

My physical connection is the following>

 

Draytek Router (Inter Vlan Interface) > Vlan 1(Native), Vlan 17 and Vlan 18 (Tagged) ---------------------- C3G124-48 Switch > GE.1.1 > Vlan 1 (Untagged), Vlan 17 and Vlan 18 (Tagged) and GE.1.2 > vlan 17 (Untagged) connected to End-Device like PC or Workstation! 

I have configured DHCP for those correspondence vlans like 

Vlan 1 > 192.168.1.0/24 (Got IP Address from the port on which no untagged vlan is assigned)           

Vlan 17 > 192.168.17.0/24 (End-Devices could not get ip address)

Vlan 18 > 192.168.18.0/24 (Not success for ip address assignment)            

 

please let me know my vlan trunk (between router and switch) are wrong  or not.

Thanks

 

    

1 REPLY 1

Ronald_Dvorak
Honored Contributor

please run “show vlan portinfo” on the C3 and post the screenshot.

 

-Ron

GTM-P2G8KFN