cancel
Showing results for 
Search instead for 
Did you mean: 

link state tracking or similar technology

link state tracking or similar technology

treese
Contributor

I have a remote site with multiple fiber circuits  connected.  They all take the same VLAN but I’m unable to aggregate the circuits because the port speed differ at each end.  Is there a way I could use link-state tracking or similar technology if a one of the circuits becomes unusable to auto disable it and enable one of the others?

2 REPLIES 2

treese
Contributor

I’m running DC-440 switch stack on one side and DC-440G2 stack on the other.

Drew_C
Valued Contributor III

Hi Ted, is there a particular product model you’re using? The answer depends on which platform you’ve got.

GTM-P2G8KFN