cancel
Showing results for 
Search instead for 
Did you mean: 

MSM B does not synchonize with MSM A

MSM B does not synchonize with MSM A

Yusuf_Kabbara
New Contributor II
Hello,

We have a BD8806 with two MSM-48c slots. but Backup slot B is not syncing with slot A,
I checked Memory usage and only 4% is used!

Omurga_SW02.18 # show slot
Slots Type Configured State Ports Flags
-------------------------------------------------------------------------------
Slot-1 8900-10G24X-c 8900-10G24X-c Operational 24 M
Slot-2 8900-10G24X-c 8900-10G24X-c Operational 24 M
Slot-3 10G2Xc 10G2Xc Operational 2 M
Slot-4 10G2Xc Initializing 2
Slot-5 Empty 0
Slot-6 G48Tc(PoE) G48Tc(PoE) Operational 48 M
MSM-A MSM-48c Operational 0
MSM-B MSM-48c Present 0

Omurga_SW02.17 # show sw

SysName: Omurga_SW02
SysLocation: SAMULAS
SysContact: support@vegaalarm.com,+903224562228
System MAC: 00:04:96:99:55:75
System Type: BD-8806

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Tue Mar 6 16:04:52 2018
Timezone: [Auto DST Disabled] GMT Offset: 180 minutes, name is not set.
Boot Time: Tue Jan 2 11:51:13 2018
Boot Count: 14
Next Reboot: None scheduled
System UpTime: 63 days 4 hours 13 minutes 39 seconds

Slot: MSM-A * MSM-B
------------------------ ------------------------
Current State: MASTER BACKUP

Image Selected: primary primary
Image Booted: primary primary
Primary ver: 12.5.4.5 16.2.3.5
patch1-6
Secondary ver: 12.5.4.5 16.1.3.6

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 12.5.4.5
487068 bytes saved on Tue Mar 6 08:59:51 2018

Your help is highly appriciated!
Yusuf
5 REPLIES 5

EtherMAN
Contributor III
you will need a valid support contract to access the downloading of images... You will need to call TAC if you do not have a contract and this is a new card to see what options you may have.

EtherMAN
Contributor III
Image differences ... you can't have one running 12.5 and the backup running 16.2.

You will need to downgrade B or update A.

To downgrade B to A's image you could force a sync. This should be not effect network and be non-impacting. A will copy it's primary and secondary images over to B and B will reboot and come back up synced. It would be better to upgrade to current code but you would have to have a system reboot for that due to code differences

And
- What if I did a , would I be able to run on B slot and upgrade A slot later?

- Is there any way to sync A from B?

Hello@EtherMAN,

I cannot find 16.2, could you please help downloading it!?

Thank you
Yusuf
GTM-P2G8KFN