I have many VLANs running on the below topology, one of them is SCADA, my requirement is simple, Creating a policy that gives priority to the SCADA Vlan on all switches.
All switches are working on L2, Except for the Core "the big one" is wo...
We have a BD8806 with two MSM-48c slots. but Backup slot B is not syncing with slot A,
I checked Memory usage and only 4% is used!
Omurga_SW02.18 # show slot
Slots Type Configured State Ports Flags
I have many X440 switches outdoor so many people could physically access, and I need to know the best practices to save the management ports and lines on the switches. with the reference links if possible.
Thank you all,
I am giving a training to client who had a similar problem but with all the configuration in place... after diagnostics we found that in one of the switches on of the ports are not configured probably..
Now we need to get the same scenario in a non-p...
We are using NetSight to monitor our Extreme network ..
I tried to get a switch down, by closing the connection from previous switches "in ring" and it took 4 minutes to get the alarm on NetSight.
When I reconnected the switch...