Policy B5

[Jefferson_Lemos]

Hello,
I am having trouble applying default policy on a port B5, reports the below error:

I'm using the default policy, someone help me?

[Jefferson_Lemos]

Hello,

Thank you all for your help, I ended up finding the problem.
I suspected it was something related to NMS have not installed properly why not the default roles he applied, then installed a new version and it worked perfectly.

It's nothing related to software error, I think something happened during installation the OVA of NMS.

regards !!!

[Ryan_Mathews]

Thanks for letting the Community know how you sorted this out Jefferson. Good stuff!

[Daniel_Coughlin]

Hi Jefferson,

If you are still having issues sorting this out it may be helpful to give the GTAC a call.

[Erik_Auerswald]

Hi Jefferson,

you should probably check both the switch and verify that the Policy Manager displays information consistent with the switch config.

The output of
show config should contain a policy section.

Br,
Erik