Hi community.
We are deploying a new Purview (Extreme Analytics) for a client.
They will be terminating GRE tunnels from their S6 chassis directly to a purview appliance.
As part of the GRE tunnel config on the S Series switch, the source if the GRE tunnel is mapped to a physcial port:
#Create GRE Tunnel to Purview Appliance
interface tun.0.2
tunnel destination x.x.x.x
tunnel mode gre l2 tbp.0.2
tunnel mirror enable
tunnel source y.y.y.y
no shutdown
exit
Does this need to be a physical port or can we use one of the tbp's (Tunnel bridge Ports).
We use some of the TBPS for VXLAN tunnels, so I would think that we could use the TBPS ports for the source port of the GRE tunnel, or does this have to be a physical port.
