Looking for some insight to how to properly configure vlans with some new requirements I have. Currently I have 4 VLANs default Tag 1, MGMT Tag 4095, v80 untagged and v90 untagged. v80 are private addresses and has port 1 (direct to router) plus ports 2, 3, 4, 5, 6, 7 (port 7 is directly connected to router and has a single public subnet /28 that are detined for port 6 ). V90 are natted addresses and has port 8 (direct to router) plus 9, 10,11,12, 13.
Now I need to be able to add additional public addresses another /28 but each public subnet has to be in its own vlan?
Not sure how to go about this.
I hope this makes sense, and thanks in advance.
