cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN syntax

VLAN syntax

SathishkumarS
New Contributor
Hi Experts,

I had seen some vlan commands in extreme switch. I am new to extreme environment and I had worked with Cisco.

# vlan create 127 type port-cist
#vlan create 327 type port-cist "voice-vlan"
#vlan members 127 1/7,1/8
#Vlan port 1/8 pvid 327

Here what is meant by port-cist and why we are assigning ​specific pvid to particular port. Please explain this.

Thanks
​​​
1 REPLY 1

dpanev
Contributor

common internal spanning tree?

 

"The root bridge for Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) is determined by comparing attributes of each bridge in the network.

The protocol considers bridge priority first. If more than one bridge has the same priority, then the protocol must consider the bridge ID. The bridge with the lowest ID becomes the root bridge. For MSTP, this bridge is called the Common and Internal Spanning Tree (CIST) Root because it is the root of the entire physical network."

GTM-P2G8KFN