Hello everyone I tried to update mine
And now I get:
Booting...
Testing main memory - PASSED
Starting...
Ethernet Routing Switch 4548GT
Boot Version 5.0.0.9 Fri Dec 29 10:11:21 2006
Hardware Rev: 03
Resets: 175
Initializing Flash...
Reading MAC Address...
MAC Address: 00-21-62-ab-ec-00
Initializing Switch CBs...
Attaching SOC unit 0... PCI device ASIC1 attached as unit 0...
Attaching SOC unit 1... PCI device ASIC2 attached as unit 1...
Diagnostic Version 5.0.1.0 Fri Mar 30 11:03:11 2007
Press Control-C to Enter Diag
Test ROM Config - PASSED
Test FANs - PASSED
Test Internal Loopback - PASSED
Test ASIC1 Registers - PASSED
Test ASIC2 Registers - PASSED
Test PHY Registers - PASSED
Test USB Registers - PASSED
Agent code verification fails!!
>> Break Recognized - Wait...
Press 'a' to run Agent code
Press 'd' to download Agent code
Press 'e' to display errors
Press 'c' to clear log message
Press 'i' to initialize config flash
Press 'p' to run POST tests...
As I understand it, I substituted the wrong firmware file, where can I get the correct firmware file for this device?
