SNMP v3 on ERS4950GTS-PWR+ / Software 7.8.1.055

[S_A_]

Hello,

we are trying to integrate ERS4950GTS-PWR+ / Software 7.8.1.055 via snmp v3 to XMC 8.5.0.169 with no luck.

Our snmp v3 configuration is probably incomplete / wrong and maybe we are just too dim.

Anyone out there who can post the config lines needed to get snmp v3 correctly configured on ERS?

Thanks in advance.

[Todd_Hancock]

The password security setting will impact if password verification is required or not. With password security enabled (default) verification is required when you enter a password or key, no password security removes the verification step (among other things) and you can script it out all in one line.

[S_A_ · Accepted solution]

Hello, thanks - the view name saved our day so far...”nncli” made the trick.

But the command still looked a bit different - the passwords have to be entered afterwards, so first:

snmp-server user test-user sha aes read-view nncli write-view nncli

After that the switch prompts you to enter the passwords.

Switch is successfully added to XMC!

[Jay6]

This should help you.

snmp-server user test-user sha test-sha aes test-aes read-view nncli write-view nncli
(created a user “test-user” with SHA password “test-sha” and AES password “test-aes“)