cancel
Showing results for 
Search instead for 
Did you mean: 

VSP and ERS Network challenge

VSP and ERS Network challenge

Klenan
New Contributor

Hello,

so i have a VSP from which i have setup a few VLANs onto stacked ERSs on a number of floors, i can reach all switches on the network and almost all the VLANs are fine; but i have two main issues:

  1. The IPTv VLAN has been acting up lately; the server has been connected to a port on a dedicated ERSs switch having the same VLAN. A few days ago, i noticed only the TV connected to that same switch is working fine while the rest can’t communicate with the server; the client called lastnight to mention it was back to normal only to call again this morning that TVs are no longer communicating.
  2. I have also noticed all the lights on the switches are blinking really fast especially the fiber uplink ones some of which are even amber in color.
18 REPLIES 18

Miguel-Angel_RO
Valued Contributor II

Klenan,

 

This simplify the setup.

Can we agree that:

  1. all the multicast clients and servers are on the same VLAN
  2. The multicast VLAN is stretched on all the switches
    1. This mean that the multicast traffic is not routed.
  3. The multicast server is the IPTV server and CCTV server

 

Mig

Klenan
New Contributor

My bad...there’s no Fabric config on there

Miguel-Angel_RO
Valued Contributor II

9caff4c25c054324ae1a5c9feed62feb_1f913.png  the ERS36xx doesn’t support Fabric Connect

Mig

Klenan
New Contributor


Hi Mig,

ERS3626GTS

 

Thanks

 

Miguel-Angel_RO
Valued Contributor II

Kleenan,

Last important question, do you run ERS4800 or ERS4900?

Mig

GTM-P2G8KFN