10GBASE-LR/LW XFP problem

[Alexandr_P]

Hi, colleagues!

Have esome strange issue:
X460-48x
XGM3s-2xf
install 10GBASE-LR/LW XFP modules, connect them with optic patch and ports not up.
Try with other XGM3S-2xf, try with other transceivers, with other optic patchcord - nothing help.
Some outputs:
#deb hal sh op
Port 49Media Type XFP_LR
XFP Vendor: OEM
XFP Part Number: XFP-10G-LR
XFP Serial Number: S1106013011
XFP Revision: A
Date Code: 110819
Transceiver Type: XFP
Connector: LC
10GE Compliance: 10GBASE-LR/LW
XFP Supported: no
# sh ports 49-50 configuration no-refreshPort Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
49 VR-Default E R OFF 10000 FULL !XFP_LR
50 VR-Default E R OFF 10000 FULL !XFP_LR

Any thoughts?

Thank you!

[Chad_Smith1]

There is now a GTACKnowledge article for this problem: Link not coming up in ports in XGM3S-2xf

[Alexandr_P]

Hi, colleagues!

Issue is resolved.
It's known bug xos0060721

One of the symptoms:
- when reject XGM3S-4sf from switch, XFP modules normally working in XGM3S-2xf on all versions of EXOS.

Thank you!

[Alexandr_P]

Hi, Kevin!

Exactly that's what I'm doing from the first time 

[Zelnosky__Kevin]

AlexandrP,

Have you tried looping the XGM modules into themselves to see if it will link up? This should help in determining if it is a particular module or a cable / optic.