Adding a second PSU 10931 module on X460
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-30-2017 06:52 AM
Dear Community
If I want to add a second internal power supply to a Summit X460, should I first switch off the switch, or can you connect the PSU 10931 module "hot"?
Is there any configuration ?
regards
Eva
If I want to add a second internal power supply to a Summit X460, should I first switch off the switch, or can you connect the PSU 10931 module "hot"?
Is there any configuration ?
regards
Eva
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-02-2017 02:43 AM
I could see my colleague Naresh has already answered for your queries here. But to add more to this in case if you want to know the PSUs which are all compatible with X460G2 hardware then before adding them to the device better to cross verify this link below to find out the compatible PSUs for the same hardware in the future:
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-PSUs-are-compatible-with-the-Summit-X46...
Let us know if you have any further queries to address here......
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-PSUs-are-compatible-with-the-Summit-X46...
Let us know if you have any further queries to address here......
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-30-2017 07:08 AM
Hi,
PSU is hot swappable. You can directly connect to the PSU to the switch and there is no configuration to be done on the switch.
PSU is hot swappable. You can directly connect to the PSU to the switch and there is no configuration to be done on the switch.
