ExtremeSwitching (EXOS/Switch Engine) - Page 313 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Measuring Frame-Delay, Loss, Jitter

Hello everyone! I need for your experience and assistance. I have two Extrme Switch lets say x450 and I need to measure the frame delay , loss and jitter between the two switch for telephone lines. After I will have to implement it to netsight to c...

State description "Unable to resolve IP address from multiple IPs" in NAC End-Systems table.

Hello the HUB ! I am getting trouble with MAC to IP resolution on customer's NAC installation. There are many X440-G2's stacks with 22.4.1.4-patch1-2 EXOS and there is nodealias configured on all access ports. On some ports IP resolution works fin...

Erro:Kern.IPv4Mc.Error - Slot-1: Unable to Add IPmc vlan

Currently using ExtremeXOS version 15.3.5.2 The problem we have is an abundant flow of error messages into the log: code:01/28/2019 13:27:06.10 Slot-1: Unable to Add IPmc vlan 3030 for 1:23 s,G=0,e0000012 IPMC 0, unit 0 Entry exists01/28/2019 13:27...

sflow, pstag, and order of packet operations.

hi, (hardware = x670g2; software = 16.1.4.2-patch1-3) i'm looking for some validation of whether this is a feature, or a bug, please. we have several ports that have pstag(s) enabled, eg: configure vlan bob tag 100 configure vlan jane tag 101 co...

How to limit BW with two source address on X460G2

Hello everybody I want to know if it is possible to limit BW with two destination address on X460G2. I tried using policy (that I put down) with meter but it tell me that I cant use two source address. entry rule1 { if match any { destination-addr...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN