cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a second PSU 10931 module on X460

Adding a second PSU 10931 module on X460

AIT_Support
New Contributor II
Dear Community
If I want to add a second internal power supply to a Summit X460, should I first switch off the switch, or can you connect the PSU 10931 module "hot"?
Is there any configuration ?
regards
Eva
2 REPLIES 2

Tripathy__Priya
Extreme Employee
I could see my colleague Naresh has already answered for your queries here. But to add more to this in case if you want to know the PSUs which are all compatible with X460G2 hardware then before adding them to the device better to cross verify this link below to find out the compatible PSUs for the same hardware in the future:

https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-PSUs-are-compatible-with-the-Summit-X46...

Let us know if you have any further queries to address here......

Naresh
Extreme Employee
Hi,

PSU is hot swappable. You can directly connect to the PSU to the switch and there is no configuration to be done on the switch.

GTM-P2G8KFN