Automatically upload switch configuration daily
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-07-2014 10:00 PM
Create Date: Mar 26 2013 5:01PM
I can get my ExtremeWare switches to automatically upload their configs each night to a tftp server I have setup. I cannot get my ExtremeXOS switches to do the same. There doesn't seem to be the same commands on the XOS switches.
I am trying to use both version 12 and 15 of XOS firmware on switches like X460's X440's X250e's X450e's etc.
BTW: The command I use on Extreme 200 and 300 switches is below -
upload configuration /configs/.cfg every 0:59
Does anyone know what the command would be to make a XOS switch upload a config each night? (from statonar)
I can get my ExtremeWare switches to automatically upload their configs each night to a tftp server I have setup. I cannot get my ExtremeXOS switches to do the same. There doesn't seem to be the same commands on the XOS switches.
I am trying to use both version 12 and 15 of XOS firmware on switches like X460's X440's X250e's X450e's etc.
BTW: The command I use on Extreme 200 and 300 switches is below -
upload configuration
Does anyone know what the command would be to make a XOS switch upload a config each night?
3 REPLIES 3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-07-2014 10:00 PM
Create Date: Mar 28 2013 8:37PM
Great to hear. UPM and scripting in general allows you to do a lot of automated processes.
Continue to post online and we will do what we can to get you the right answers.
P (from Paul_Russo)
Great to hear. UPM and scripting in general allows you to do a lot of automated processes.
Continue to post online and we will do what we can to get you the right answers.
P (from Paul_Russo)
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-07-2014 10:00 PM
Create Date: Mar 28 2013 8:03PM
Hey thanks, that worked perfectly. Never knew the power of making upm profiles before this. (from statonar)
Hey thanks, that worked perfectly. Never knew the power of making upm profiles before this. (from statonar)
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-07-2014 10:00 PM
Create Date: Mar 26 2013 7:01PM
hello statonar
You are correct but what you can do is set up a UPM profile that has the upload command.
Then you can set up a timed interval so that the profile runs every 24 hours.
Hope that helps let me know if you have any other questions.
P (from Paul_Russo)
hello statonar
You are correct but what you can do is set up a UPM profile that has the upload command.
Then you can set up a timed interval so that the profile runs every 24 hours.
Hope that helps let me know if you have any other questions.
P (from Paul_Russo)