balancing link

[Felipe]

Good afternoon,In a client must perform a link balancing between two locations. The interlinking between them, atualemente, is performed through radio (Radwin), however the client requests to be balanced (50% and 50%) the traffic with an optical fiber. The port is gigabit and Fibre is 100.
What would be the best possible way?
LACP L2?
Model: X440-24t
View: 15.2.1.5

Thank you

[Henrique]

Hi Felipe, I haven't tried MLAG configuration in EXOS VM yet, but I believe you can get this working in your lab.

Please check the article below for information about how to get the latest EXOS VM version:

Where to download the latest version of EXOS VM?

[Felipe]

Hi Henrique,

Did I can perform this lab with the ExtremeXOS VM?

[Henrique]

Hi Felipe, just in case you want to check the EXOS version supported by platform you can find that in the link below:

http://documentation.extremenetworks.com/hw_sw_compatibility/HardwareSoftwareCompatibility/r_summit-...

[Felipe]

Hi Henrique,

Thank you for help, but unfortunately I'll have to check for new swichtes that accept EXOS 15.5, because in my lab I as follows:

Extreme Morro Christ Model: X440-24T View: 15.5.3.4
Extreme Seat Model: X250e-48p View: 15.3.2.11 Pacth1-2
Extreme Garage Model: X450e-48p View: 15.3.2.11 Pacth1-2

It was my laboratory for water below. For not accept "alternate ipaddress"