cancel
Showing results for 
Search instead for 
Did you mean: 

balancing link

balancing link

Felipe
New Contributor
Good afternoon,In a client must perform a link balancing between two locations. The interlinking between them, atualemente, is performed through radio (Radwin), however the client requests to be balanced (50% and 50%) the traffic with an optical fiber. The port is gigabit and Fibre is 100.
What would be the best possible way?
LACP L2?
Model: X440-24t
View: 15.2.1.5

Thank you
24 REPLIES 24

Henrique
Extreme Employee
Hi Felipe, I haven't tried MLAG configuration in EXOS VM yet, but I believe you can get this working in your lab.

Please check the article below for information about how to get the latest EXOS VM version:

Where to download the latest version of EXOS VM?

Felipe
New Contributor
Hi Henrique,

Did I can perform this lab with the ExtremeXOS VM?

Henrique
Extreme Employee
Hi Felipe, just in case you want to check the EXOS version supported by platform you can find that in the link below:

http://documentation.extremenetworks.com/hw_sw_compatibility/HardwareSoftwareCompatibility/r_summit-...

Felipe
New Contributor
Hi Henrique,

Thank you for help, but unfortunately I'll have to check for new swichtes that accept EXOS 15.5, because in my lab I as follows:

Extreme Morro Christ Model: X440-24T View: 15.5.3.4
Extreme Seat Model: X250e-48p View: 15.3.2.11 Pacth1-2
Extreme Garage Model: X450e-48p View: 15.3.2.11 Pacth1-2

It was my laboratory for water below. For not accept "alternate ipaddress"
GTM-P2G8KFN