basic routing question

[Robin_Minshall1]

I have VLAN configured with no routing on my Extreme network core (very basic network). the Vlans are routed on the gateway which is our UTM appliance (handles WAN/ VPN public traffic etc).

I would like to create a new set of VLANs on the core with routing handled by the core. so clients on those VLANS would have the VLAN IP as the gateway (i think??). how do i then get those clients to route external traffic to the UTM (WAN appliance).

Thanks

[PARTHIBAN_CHINN]

Note:
Create vlans
Add ports
Assign ip address
and then "enable ipf"
one command will enable ip forwarding on all vlans.
enable ipfowarding works for specific vlan.

[Paul_Russo]

Hey Robin

Yes you will need to enable IPforwarding on that VLAN as well

P

[Robin_Minshall1]

one more question about this. would I need to enable IP forwarding on the VLAN that the Default Gateway is on?

[Robin_Minshall1]

Thanks for the replys, i will be testing this tomorrow and will let you know if i get it to work.

Thanks