Black Diamond 8810; what is the command to show the layer 3 (inter vlan) switching utilization?

[Rien_Maurik]

Hello.

I want to know in a Black Diamond 8810 the Utilization of the Layer 3 traffic between the Vlan's.

For the Physical interfaces the command to see the utilization is "show ports utilization". Is there also a command to see the same for the Vlan interfaces or the layer 3 process?

[BrandonC]

Hi Rien,

Unfortunately, EXOS does not provide a command to show this information.

If you like, I can open up a feature request for this in your name.

-Brandon

[BrandonC]

Hi Rien,

There is the command 'show ipstats'. Does this look like what you are looking for?

* master.5 # show ipstats IP Global Statistics InReceives = 7 InUnicast = 0 InBcast = 0 InMcast = 7 InHdrErr = 0 Bad vers = 0 Bad chksum = 0 Short pkt = 0 Short hdr = 0 Bad hdrlen = 0 Bad length = 0 InDelivers = 7 InDiscards = 0 Bad Proto = 0 OutRequest = 7 OutDiscard = 0 OutNoRoute = 0 Forwards = 0 ForwardOK = 0 Fwd Err = 0 NoFwding = 0 Redirects = 0 No route = 0 Bad TTL = 0 Bad MC TTL = 0 Bad IPdest = 0 Blackhole = 0 Output err = 0 MartianSrc = 0 FragCreate = 0 FragOKs = 0 FragFails = 0 Global ICMP Statistics OutResp = 0 OutError = 0 InBadcode = 0 InTooshort = 0 Bad chksum = 0 In Badlen = 0 echo reply In = 0 Out = 0 destination unreachable In = 0 Out = 0 - protocol unreachable In = 0 Out = 0 redirect In = 0 Out = 0 echo In = 0 Out = 0 router advertisement In = 0 Out = 0 time exceeded In = 0 Out = 0 Global IGMP Statistics Out Query = 0 Out Report = 0 Out Leave = 0 In Query = 0 In Report = 0 In Leave = 0 In Error = 0 Router Interface Default inet 1.1.1.1 netmask 255.0.0.0 broadcast 1.255.255.255 Stats: IN OUT 5 5 packets 160 160 octets 5 5 Mcast pkts 0 0 Bcast pkts 0 0 errors 0 0 discards 0 unknown protos Router Interface p_eaps inet 2.2.2.2 netmask 255.0.0.0 broadcast 2.255.255.255 Stats: IN OUT 4 4 packets 128 128 octets 4 4 Mcast pkts 0 0 Bcast pkts 0 0 errors 0 0 discards 0 unknown protos


-Brandon