Both nodes in a 2 switch stack show Role as Master

[Terry_Jacobs]

Switch 2, previously with Role Backup, is now showing at Role Master. Switch 1 is still actively the Master. All ports on Switch 2 are now showing as Ready. Devices connected to Switch 2 are no longer responding.

[Patrick_Voss]

Can you send a "show switch" and "show slot"?

[Terry_Jacobs]

Sorry, 15.2.3.2 is the active version.

[Terry_Jacobs]

version 12.5.4.5
Slot-2 information:
State: Failed
Download %: 100
Restart count: 1 (limit 5)
Serial number: 800322-00-07 1151G-82157
Hw Module Type: X460-48t
SW Version: 15.2.3.2
SW Build: v1523b2-patch1-12
Configured Type: X460-48t
Ports available: 58
Recovery Mode: Reset
Node MAC: 02:04:96:83:9E:27
Current State: FAIL
Image Selected: secondary
Image Booted: secondary
Primary ver: 12.6.4.1
Secondary ver: 15.2.3.2
Config Selected: primary.cfg

[Terry_Jacobs]

Show switch displays only switch 1. Here's output from show slot:
Slot-1 SJCO-DMZ-X460-48T-2.23 # sh slot
Slots Type Configured State Ports
--------------------------------------------------------------------
Slot-1 X460-48t X460-48t Operational 58
Slot-2 X460-48t X460-48t Failed 58
Slot-3 Empty 0