ExtremeSwitching (EXOS/Switch Engine) - Page 340 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Locking a device to a specific port

We have a customer who wants to lock specific MAC addresses to specific ports as a form of location tracking. They want 10:20:30:40:50:ab to only be able to connect to ABC MDF port 1:1. Is there a way to accomplish this in XOS on X460s and X440s? D...

Extreme X460 with high CPU and packets going to CPU

Hello Guys, I'm living a problem in our MPLS network and would like to share you experience. One of our Extreme X460 switch is experiencing high CPU load and with process mpls and bcmRX in the top of the processes with high utilisation. using show...

Log traffic between two end points?

I have the following extreme switches running layer 2 and layer 3 for our organisation: X670 G1 Firmware 16.2.2.4 X670 G2 Firmware 21.1.1.4 What is my easiest option for capturing layer 3 conversations from a source IP range? I'd like to know what...

how to see perticular port mac in X450a-48tdc, not what are the MAC received.

I want to see MAC address of particular a specific Port (e.g. port no. 35) Note:- Not what are the MAC received on that port (sh fdb ) Is there any procedure to check that or System mac is the only one ?

Two offices setup with the same configs, but different hardware and XOS versions, but WOL won't work on the newer equipment

We have one site with the following configs: Location A Core switch (Summit x450a running XOS 15.3.4.6) that is connected to a desktop stack (Summit x440 running XOS 16.2.4.5) Location B Core switch (Summit x460-G2 running XOS 22.4.1.4 patch 1-2) t...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN