can't ping from core switch any vlan ip add!

[CEFLOU]

Hi all,

so, i configure my core switch (stack of 2 X670V) with different vlan interf ip adresses.
all my configuration is on the vrf-default.

i'm trying to ping in my core switch his interface but i have response "Packet transmit error; Destination unreachable"

there is my config!

create vlan VLAN2
config vlan VLAN2 tag 2
config vlan VLAN2 add ports 1:1-4 tagged
config vlan VLAN2 ipaddress 10.254.1.254/24
enable ipforwarding VLAN2
create vlan VLAN3
config vlan VLAN3 tag 3
config vlan VLAN3 add ports 1:1-4 tagged
config vlan VLAN3 ipaddress 10.254.3.254/23
enable ipforwarding VLAN3
create vlan VLAN6
config vlan VLAN6 tag 6
config vlan VLAN6 add ports 1:2-4 tagged
config vlan VLAN6 ipaddress 10.170.1.250/22
enable ipforwarding VLAN6

############### the result of my ping on vlan management ############

* Slot-1 PAR1SWT0030.32 # ping 10.254.3.254
Ping(ICMP) 10.254.3.254: 4 packets, 8 data bytes, interval 1 second(s).
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable
Packet transmit error; Destination unreachable

--- 10.254.3.254 ping statistics ---
0 packets transmitted, 0 packets received, 0% loss
round-trip min/avg/max = 0/0/0 ms

###############################################################

I Need your help please, so i'm blocked for continuing my config

[CEFLOU]

in my opinion it's not ok! for example, when we have another dhcp server on VOICE vlan, how we do?
how the client join his correct server?

[CEFLOU]

thank's every body, it semms ok now.

i juste reconfigure my core and i reload it!

so i have another question about dhcp relay, i want to activate a dhcp relay on vlan data.

i configure the ip adresse of my dhcp server on vr-default then i just enable bootprelay on the vlan?

there is my conf:

configure bootprelay add 10.170.10.30 vr VR-Default
configure bootprelay add 10.170.10.31 vr VR-Default
enable bootprelay ipv4 vlan DATA

thank's for your help

[Stephane_Grosj1]

Hi,

possible issues:

- you're on a different VR: you say that everything is on VR-Default, so I assume this is not the case. However you do say also "result of my ping in management vlan". The out of band management interface is in a different VR. So if you try to reach your vlan from the management vlan, that's the issue, assuming you didn't ping from the box itself (which defaults to VR-Default).

- the VLAN aren't Up: so that a VLAN is Up, you need at least one port Up in that vlan. A "sh vlan" would help to troubleshoot. You can create a loopback interface per vlan if needed.

if not that, as Parthiban said, try to re-enable ipforwarding.

Stephane

[PARTHIBAN_CHINN]

enable ipforwarding one more time.
I guess internal TTL is changed.
See if you can reboot for temporary workaround.
Let me know if this solves your issue.
there is a known issue.

[CEFLOU]

Hi brandon, I pinging from the core switch, i try to ping themself first but anyway. I have 10 vlans on my core switch with 8 routed. His ip adresse was the GW for my différents vlans. Yes, i have a static route to the FW.