ExtremeSwitching (EXOS/Switch Engine) - Page 63 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Spanning Tree Configuration Detailed step by Step

Dear Gentleman and Ladies i hope you have a nice daykindly guide me with command to create Spanning Tree configuration for two XG440 Switches Also if i want to clear the existing one could you provide how to do this ? Thanks in advance

Ingress ACL Block traffic to Private networks and Enable establish from Private Network

Hi GuysI am managing and testing an EXOS x435;Setup:Ingress ACL to VLAN8 to block all private traffic:source VLAN8 destination All Private networks 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16Apply rule to VLAN8 in Ingress (only), everything works.butI ne...

Resolved! Spanning Tree - * next to port

Im trying to troubleshoot a spanning tree blocking issue. When I try to reproduce the issue in my lab I cant seem to do it.The only configuration difference I can see between my lab and production switch is if I run the show stpd detail command when ...

Monitoring/scraping a Summit x460-24p with Prometheus/Grafana using snmp

Hello everybody,has anybody here tried monitoring a x460-24p with Prometheus using SNMP/ the snmp_exporter?I have set up Prometheus and the snmp_exporter to monitor and scrape other devices but now I'd like to extend this by monitoring some of our x4...

Overall stack/switch/enclosure status via SNMP polling

Looking for suggestions. We use Auvik to poll SNMP OIDs on our Extreme devices. Since there is no way to anticipate the possible number of power supplies in a stack of devices (seemingly, each has the option of supporting 4 based on the mib), there's...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN