Cant config snmp v2c on x670 ExtremeXOS version 16.1.3.6 16.1.3.6-patch1-2

[Roman_Solovyov]

cant get any info from snmpd:
09/22/2016 23:01:27.21 Login failed through SNMPv1/v2c - bad community name (192.168.6.252)09/22/2016 23:01:27.04 Previous message repeated 2 additional times in the last 1 second(s)

snmp config is

configure snmpv3 delete user "admin" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete user "initial" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete user "initialmd5" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete user "initialsha" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete user "initialmd5Priv" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete user "initialshaPriv" engine-id 80:00:07:7c:03:02:04:96:8f:c3:e2
configure snmpv3 delete community "private"
configure snmpv3 delete community "public"
configure snmpv3 add community "123456789" name "123456789" user "v1v2c_ro"
disable snmpv3 default-group

Slot-1 kernel.29 # show snmpv3 community
Community Index : 123456789
Community Name : 123456789
Security Name : v1v2c_ro
Context EngineID : 80:00:07:7c:03:02:04:96:8f:c3:e2
Context Name :
Transport Tag :
Storage Type : NonVolatile
Row Status : Active

Total num. of entries in snmpCommunityTable : 1

in hub I see
https://extremeportal.force.com/ExtrArticleDetail?an=000077695

configure snmpv3 add access v1v2c_ro sec-model snmpv2c sec-level noauth read-view defaultUserView notify-view defaultNotifyViewconfigure snmpv3 add mib-view defaultUserView subtree 1 type includedit says - that it exist...

roman@jusi:~$ snmpwalk -v2c -c 123456789 192.168.6.45
Timeout: No Response from 192.168.6.45
roman@jusi:~$ ping 192.168.6.45PING 192.168.6.45 (192.168.6.45) 56(84) bytes of data.
64 bytes from 192.168.6.45: icmp_seq=1 ttl=63 time=0.674 ms

What I done wrong?

romanse@serdi.ru

[Roman_Solovyov]

Thanks a lot! Now everything is ok!

[Kawawa]

v1v2c_ro is a default group, therefore using the command disable snmpv3 default-group disables it.

disable snmpv3 default-group# show snmpv3 group
Group Name : v1v2c_ro
Security Name : v1v2c_ro
Security Model : snmpv1
Storage Type : NonVolatile
Row Status : NotInServiceGroup Name : v1v2c_ro
Security Name : v1v2c_ro
Security Model : snmpv2c
Storage Type : NonVolatile
Row Status : NotInService Either you create a new group that you can associate with your newly created community, configure snmpv3 add user 123456789
configure snmpv3 add group 123456789 user 123456789 sec-model snmpv2c
# show snmpv3 group
Group Name : 123456789
Security Name : 123456789
Security Model : snmpv2c
Storage Type : NonVolatile
Row Status : ActiveOR you enable the default groups
enable snmpv3 default-group# show snmpv3 group
Group Name : v1v2c_ro
Security Name : v1v2c_ro
Security Model : snmpv1
Storage Type : NonVolatile
Row Status : Active
Group Name : v1v2c_ro
Security Name : v1v2c_ro
Security Model : snmpv2c
Storage Type : NonVolatile
Row Status : ActiveHope this helps,