Create Date: Jul 2 2012 9:50AM
I have 1 main site 1 remote site. All traffic is coming back to x450 core at main site. At the main site I have 2 internet gateways. gateway 1 99% of users use for internet access, GW 2 is a smaller netgate FW. The remote site is connected via t1 leased line. Looking for guidance on how to configure a single pc at remote site to connect to GW2 at main site. I think flow-redirect command might do it , but not sure. Thank you for your time (from David_Kordyban)
