Config iproute by origen

[Daniel_Valera]

Hi, I have a switch X450e-48p with image ExtremeXOS version 12.0.3.16 and my question is if can i configure various routes by origen?

I need configure various routes to internet in different gateways but separate depend of equipment inside the LAN.

regards

[Henrique]

Hi Daniel,

I believe that Simon provided the information you need.

I would recommend you to check the articles below:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-PBR-on-EXOS-switches-for-...

On EXOS you can use a combination of match-conditions to redirect traffic from an specific SrcIP to a GW.

Please see the link below with a table with supported match-conditions (that's for EXOS 21.1 release but you can find the same information in the EXOS User Guide based on your EXOS version):

http://documentation.extremenetworks.com/exos/EXOS_21_1/ACL/r_acl-rule-syntax-details.shtml

Link to download the EXOS User Guide:

http://www.extremenetworks.com/support/documentation/

[Henrique]

Nice Daniel! Thanks for the feedback!

[Daniel_Valera]

Great. works correctly!

Thansk a lot

[Daniel_Valera]

Hi Nick, the default gateway is the switch 192.168.100.1