configure port to allow multiple vlans but untag one specific vlan traffic. also set up that specific vlan as default vlan of that port?

[jwumcp]

Hello,

I need some help to make some changes to a X465 switch configured by someone else. I need to configure a port to allow multiple vlans but untag one specific vlan traffic. Also set up that specific vlan as default vlan of that port? This is basically set up trunk port to allow multiple vlans and set up one native vlan in Cisco world? Can someone please show me how to achieve this in EXOS?

Thank you,

John

[Drew_C]

You’re welcome, John! Glad to help!

[jwumcp]

Thank you very much Drew.

John

[Drew_C · Accepted solution]

Hi John,

If you add the port as untagged, it will be the “default” VLAN. The VLAN tag/ID won’t matter in EXOS if you set it that way.

[jwumcp]

Thank you Drew for your quick response.

One more question, how can I set up vlan red as the default vlan for that port (i.e, use vlan red’s vid as the default vid)? In ERS, I use untagpvidonly to configure AP port.

Thank you,

John