Configuring the ip unnumbered interface

[Chubak_Igor]

How do these settings on ExtremeXOS version 15.4.1.3 X460-48t
http://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/13786-20.html#diagone

[Erik_Auerswald]

Hi Chubak,

Cisco routers provide some special configuration options for serial interfaces. Those do not apply to Ethernet switches, neither for Cisco's nor for Extreme's. You cannot blindly copy a router configuration to a switch.

Br,
Erik

[Vladimir_Chukov]

Ip unnumbered can be done via Super-Vlan in ExtremeXOS.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-subvlan-with-super-vlan

[Patrick_Voss]

Hi Chubak,

Based on the output you provided it looks like you are trying to create 3 vlans with vids of 101, 102 and 103. You would like them all to have loopback enabled. If this is true here are the commands below:

create vlan one tag 101
create vlan two tag 102
create vlan three tag 103

configure vlan one ipaddress 192.168.1.1/24
enable loopback vlan one

each vlan has to have its own ip address in a different subnet, like so:

configure vlan two ipaddress 192.168.2.1/24
configure vlan three ipaddress 192.168.3.1/24

Then you can enable loopback on those as well

enable loopback vlan two
enable loopback vlan three

Please let me know if this is what you are looking for.

[Chubak_Igor]

Task Extreme?

Create a loopback Interface?
interface loopback 1
IP address 192.168.1.1 255.255.255.0

Create Interface vlan 101
IP address (loopback 1)

Interface vlan 102
IP address (loopback 1)

Interface vlan 103
IP address (loopback 1)

Example Cisco:

interface loopback 1
IP address 192.168.1.1 255.255.255.0

interface vlan 101
IP unnumbered loopback 1

Interface vlan 102
IP unnumbered loopback 1

Interface vlan 103
IP unnumbered loopback 1