Hi, Some of our X440G2 switches show high temperatures (around 90°C) Fans seem to work. So when looking at CPU usage, I’ve noticed the HAL process has a max usage of 99,9% and a constant 20%. After reading this article I was wondering if the bootROM...
We have a number of Yealink VoIP phones connected to x440-G2 switches. Our current LLDP settings are: configure lldp port 1:1 advertise port-descriptionconfigure lldp port 1:1 advertise system-capabilitiesconfigure lldp port 1:1 advertise management...
Hi Community I am new to the Extreme SPB Fabric (Avaya). I have some questions around the configuration to implement what the following: Below is a high level diagram of the network we are trying to configure in my lab: The requirement from the...
My configuration is configure iparp 10.10.10.1 vr VR-Default <MAC add>. My requirement is If I change the IP address of that particular device. It should not work means it should not PING. How do I do that? I only want to allow particular IP fro...
BGP is working fine. I have a VR that’s happily peering with peers. Running EXOS 16.2.5.4 on a BD8800 The “problem” is, that this VR handles several connected VLANs, plays default gateway for those vlans/networks. Now someone on the corporate securit...
