Creating VLAN ACL on BD8806

[Alaa_Naifa]

trying to create VLAN acl on BD8806 and getting the below error;

SKB-BD8806.38 # configure access-list PEM_LOOP ports 2:48 egress
Error: Policy PEM_LOOP has syntax errors
Line 3 : Attribute cvid is not supported in this platform.

ACL is very simple as below and I tried to apply it ingress and egress on untagged VMAN port.

entry 1 {
if {
cvid 10;
}
then {
count HIT ;
permit;
}
}

version of the EXOS is 15.3.1.4
patch1-44

Please advise

[André_Herkenrat]

sorry, but 15.3 is old...

[Alaa_Naifa]

Yes i can see that but why !! Its black dimond 8800 and the image is not old

[StephenW]

You have correct HW. It looks like EXOS 15.4 is where CVID was supported as a match condition. I would upgrade and the ACL will work.

[Alaa_Naifa]

Slots Type Configured State Ports Flags ------------------------------------------------------------------------------- Slot-1 10G4Xc 10G4Xc Operational 4 MB Slot-2 G48Tc G48Tc Operational 48 MB Slot-3 10G1Xc & nbsp; 10G1Xc Operational 1 MB Slot-4 G8Xc G8Xc Operational 8 MB Slot-5 Empty 0 Slot-6 10G8Xc 10 G8Xc Operational 8 MB MSM-A MSM-48c Operational 0